Consumer Factsheet on: CADMIUM

List of Contaminants

As part of the Drinking Water and Health pages, this fact sheet is part of a larger publication:
National Primary Drinking Water Regulations.

This is a factsheet about a chemical that may be found in some public or private drinking water supplies. It may cause health problems if found in amounts greater than the health standard set by the United States Environmental Protection Agency (EPA).

What is Cadmium and how is it used?

Cadmium is a metal found in natural deposits as ores containing other elements. The greatest use of cadmium is primarily for metal plating and coating operations, including transportation equipment, machinery and baking enamels, photography, television phosphors. It is also used in nickel-cadmium and solar batteries and in pigments.

Why is Cadmium being regulated?

In 1974, Congress passed the Safe Drinking Water Act. This law requires EPA to determine safe levels of chemicals in drinking water which do or may cause health problems. These non-enforceable levels, based solely on possible health risks and exposure, are called Maximum Contaminant Level Goals.

The MCLG for cadmium has been set at 5 parts per billion (ppb) because EPA believes this level of protection would not cause any of the potential health problems described below.

Based on this MCLG, EPA has set an enforceable standard called a Maximum Contaminant Level (MCL). MCLs are set as close to the MCLGs as possible, considering the ability of public water systems to detect and remove contaminants using suitable treatment technologies.

The MCL has also been set at 5 ppb because EPA believes, given present technology and resources, this is the lowest level to which water systems can reasonably be required to remove this contaminant if it occurs in drinking water.

These drinking water standards and the regulations for ensuring these standards are met, are called National Primary Drinking Water Regulations. All public water supplies must abide by these regulations.

What are the health effects?

Short-term: EPA has found cadmium to potentially cause the following health effects when people are exposed to it at levels above the MCL for relatively short periods of time: nausea, vomiting, diarrhea, muscle cramps, salivation, sensory disturbances, liver injury, convulsions, shock and renal failure.

Long-term: Cadmium has the potential to cause the following effects from a lifetime exposure at levels above the MCL: kidney, liver, bone and blood damage.

How much Cadmium is produced and released to the environment?

2.9 million lbs. of cadmium were produced in the US in 1986, and nearly twice that amount was imported in the same year. Cadmium occurs naturally in zinc, lead, copper and other ores which can serve as sources to ground and surface waters, especially when in contact with soft, acidic waters. Major industrial releases of cadmium are due to waste streams and leaching of landfills, and from a variety of operations that involve cadmium or zinc. In particular, cadmium can be released to drinking water from the corrosion of some galvanized plumbing and water main pipe materials.

From 1987 to 1993, according to EPAs Toxic Chemical Release Inventory, cadmium releases were primarily from zinc, lead and copper smelting and refining industries, with the largest releases occurring in Arizona and Utah.

What happens to Cadmium when it is released to the environment?

Some cadmium compounds are able to leach through soils to ground water. When cadmium compounds do bind to the sediments of rivers, they can be more easily bioaccumulated or re-dissolved when sediments are disturbed, such as during flooding. Its tendency to accumulate in aquatic life is great in some species, low in others.

How will Cadmium be detected in and removed from my drinking water?

The regulation for cadmium became effective in 1992. Between 1993 and 1995, EPA required your water supplier to collect water samples once and analyze them to find out if cadmium is present above 5 ppb. If it is present above this level, the system must continue to monitor this contaminant every 3 months.

If contaminant levels are found to be consistently above the MCL, your water supplier must take steps to reduce the amount of cadmium so that it is consistently below that level. The following treatment methods have been approved by EPA for removing cadmium: Coagulation/Filtration, Ion Exchange, Lime Softening, Reverse Osmosis.

How will I know if Cadmium is in my drinking water?

If the levels of cadmium exceed the MCL, the system must notify the public via newspapers, radio, TV and other means. Additional actions, such as providing alternative drinking water supplies, may be required to prevent serious risks to public health.

This is a factsheet about a chemical that may be found in some public or private drinking water supplies. It may cause health problems if found in amounts greater than the health standard set by the United States Environmental Protection Agency (EPA).

Drinking Water Standards:

MCLG: 5 ppb
MCL: 5 ppb

Cadmium Releases to Water and Land, 1987 to 1993 (in pounds):

Water Land TOTALS 31,487 2,059,574
Top Seven States *

AZ 503 433,035
UT 1,750 372,010
MT 0 315,965
TN 2,700 288,781
ID 250 225,761
MO 2,361 189,914
WI 0 106,000

Major Industries*

Zinc, lead smelting 5,061 831,948
Copper smelting, refining 2,253 805,045
Indust. inorganic chems 250 225,761
Electroplating, anodizing 0 106,000
Steelworks, blast furnaces 5 13,000
Inorganic pigments 5,140 7,000

* Water/Land totals only include facilities with releases greater than a certain amount – usually 1000 to 10,000 lbs.

Learn more about your drinking water!

EPA strongly encourages people to learn more about their drinking water, and to support local efforts to protect and upgrade the supply of safe drinking water. Your water bill or telephone books government listings are a good starting point.

Your local water supplier can give you a list of the chemicals they test for in your water, as well as how your water is treated.

Your state Department of Health/Environment is also a valuable source of information.

For help in locating these agencies or for information on drinking water in general, call: EPAs Safe Drinking Water Hotline: (800) 426-4791.

For additional information on the uses and releases of chemicals in your state, contact the: Community Right-to-Know Hotline: (800) 424-9346.